Fridge and freezer types we repair

Bar fridge repairs, and when fixing one is worth it

Warm drinks, frozen cans, an iced-up ice box or a door that will not close? We repair compressor bar fridges across Gauteng, and tell you honestly when one is not worth fixing.

  • 25 years' experience5,000+ fridges repaired
  • 300+ five-star reviewsFrom Gauteng customers
  • Open 24/7With you in about 1 hour
  • 6-month warrantyOn repairs and regassing

Bar fridge repairs depend on how your bar fridge cools. Most have a small compressor and are repaired like a full-size fridge, with a new thermostat, start relay or door seal, a regas or a compressor replacement. Some silent or fan-only models cool without a compressor, and those are often not worth repairing.

Which kind of bar fridge do you have?

Kind What you hear At the back
Compressor (most bar fridges) A hum, and a click when it starts or stops A black compressor at the bottom and a grid of pipes, or warm sides
Thermoelectric (some small and glass-door units) Only a small fan A fan and a finned metal block
Absorption (a few silent bar fridges) Nothing Pipes and fins that get warm

Thermoelectric mini fridges cool with an electronic module and a fan. Many are rated to cool only about 18 to 22°C below room temperature, so in a 32°C room the inside stays at 10°C or more, which is not a fault. Absorption fridges have no compressor: a small heater drives ammonia round a sealed cooling unit, so they run silently. If one smells of ammonia, keep flames away, open the windows, then switch it off and unplug it.

Repairs on these two types are limited: thermoelectric parts are often unavailable, and a leaking absorption cooling unit usually has to be replaced, not regassed, so we do not promise a repair. We repair all major fridge brands, and a photo of the rating plate tells us the model and how it cools, so send it on WhatsApp when you book a repair.

Common bar fridge repairs

Freezing everything

Check the dial first: on most bar fridges a higher number means colder, the dial is easily knocked, and anything touching the ice box freezes on any setting. If it freezes on a low setting and the motor never stops, the thermostat is sticking, or its thin sensing tube has slipped off the ice box and never feels cold enough. That calls for thermostat replacement or refitting the tube.

Bar fridge not cooling

How it fails tells you why, and our guide to a fridge not cooling covers the rest:

  • Light on, motor silent. Usually the thermostat or a wiring fault.
  • A click every few minutes and a short hum. The start relay or overload protector, or a compressor that cannot start.
  • Running non-stop, but the ice box frosts only partly or not at all. Usually a gas leak, very often after someone chipped at the ice box with a knife and punctured a gas channel.

A leak needs a proper regas, with the hole repaired first. Most newer bar fridges use R600a, a flammable gas. If you hear hissing after a slip with a knife, keep flames and sparks away, open a window or door for a few minutes, then switch off at the wall, unplug the fridge and call us.

Ice box iced shut

As frost builds up, the ice box flap freezes shut and the ice insulates the cooling plate. Defrost before the ice is about half a centimetre thick: switch off at the wall, empty it, leave the doors open with towels underneath and let it melt on its own. Never chip at it or use a hair dryer. Ice that is back within days means warm air is getting in, usually past the door seal, as our guide to ice build-up explains.

A door that will not stay shut

Full 2-litre bottles in the door shelves slowly pull a small door down on its hinges until the seal stops gripping. Move heavy bottles onto the shelves and level the fridge so the front sits a little higher than the back. If it still drops or the seal is torn, we reset the hinge or carry out a door seal replacement.

Noise

A hum, a click as the motor starts or stops and the odd gurgle are normal, and a rattle usually means the fridge is touching the counter or wall. A loud buzz then a click, with no cooling, usually points to the start relay, as our guide to a noisy fridge explains.

Bar fridges in counters, lapas and garages

Most freestanding bar fridges shed heat through a black grid on the back or through their sides, so they need the clearances in the manual. Pushed into a closed bar counter, the fridge runs non-stop, the cabinet gets warm and the compressor cuts out on its overload, then restarts minutes later. Only models sold as built-under or front-venting are made to sit inside a cabinet, as our page on built-in fridges explains.

A fridge rated N or SN is designed for rooms up to 32°C, which a closed garage, lapa or sunny patio can pass on a summer afternoon, as our Roodepoort guide to climate class explains. Many manuals also say a fridge must not stand outdoors or anywhere damp, so check yours before using one on a patio or in an open lapa.

Outdoor plug points suffer from damp, dust and storm surges, and a damp socket can trip the earth leakage, as our guide to a fridge tripping the electricity explains. Have an electrician fit a covered outdoor socket, and plug the fridge into it through a surge protector with a switch-on delay, not a long extension lead.

FAQ

Bar fridge repairs: questions

Is it worth repairing a bar fridge?

If it has a compressor, often yes. A thermostat, start relay or door seal is usually worth fixing. A gas leak or failed compressor is a closer call, because on a small fridge the repair can cost more than half the price of a comparable new one, and we tell you so first.

Why is there water in the bottom of my bar fridge?

A bar fridge with an ice box has a drip tray under it for melting frost. If the tray is missing, cracked or overflowing, or the fridge leans forward, water collects in the bottom. Empty the tray after defrosting and level the fridge. Without an ice box, check the drain hole in the back wall.

Why are the cans at the top of my bar fridge freezing?

The ice box is the cooling plate, so the top shelf is usually the coldest. Move cans down a shelf and turn the dial one step warmer, a lower number on most bar fridges. Next morning, a thermometer in a glass of water on the middle shelf should read 3 to 5°C.

Where is the rating plate on a bar fridge?

Look for a sticker on an inside wall or on the back. It shows the model number and, on a compressor fridge, the type and amount of refrigerant. A sharp photo without the flash is all we need.

Need bar fridge repairs?

Book a technician to your door anywhere in Gauteng. You get a clear price before any work starts.

WhatsApp us