Authorised Hisense fridge repairs

Hisense fridge repairs in Gauteng

An E code on the display, a warm fridge section or a water dispenser that has stopped? We repair and regas Hisense fridges at homes across Gauteng, from bar fridges to side-by-sides.

  • 25 years' experience5,000+ fridges repaired
  • 300+ five-star reviewsFrom Gauteng customers
  • Open 24/7With you in about 1 hour
  • 6-month warrantyOn repairs and regassing

Hisense fridge repairs at your home

Hisense has been selling appliances in South Africa for around 30 years and has made fridges at its factory in Atlantis, near Cape Town, since 2013. Its fridges are popular because they offer a lot of space and features for the price, from compact bar fridges and top-freezer models to side-by-sides with water dispensers and multi-door fridges.

Many Hisense fridges are frost-free, many use inverter compressors and the larger models have electronic controls that show a code when something goes wrong. We diagnose the fault at your home, explain it in plain language and give you a clear price before any work starts.

Common Hisense fridge faults

Sensor codes

E1, E2 and E3 are among the most common Hisense codes we see. They point to a temperature or defrost sensor that is giving readings outside its normal range. Sometimes the sensor has failed, and sometimes the wiring or a connector has been damaged, which is common after a fridge has been moved. We test the sensor against its specification before replacing anything.

Warm fridge, cold freezer

In a frost-free Hisense, the fridge section depends on cold air from the freezer side. If the defrost heater or sensor fails, ice builds up on the evaporator and blocks the airflow. You may hear the fan scraping on ice or see frost on the back panel. Our guide to a warm fridge with a cold freezer explains the fault in more detail.

Water dispensers

Many Hisense side-by-sides sold here have a water tank you fill by hand. If the dispenser stops, check that the tank is seated properly, then check for a lock symbol on the display. A water line that has frozen in the door is another common cause, especially if the freezer is set very cold. See our ice maker and water dispenser repairs page.

Not cooling after a power cut

Power surges are hard on control boards and compressor start components. If your Hisense died after a power cut or a storm, mention it when you book. On inverter models, a fault on the main board can stop the compressor even though the compressor itself is fine.

Noisy fridges

Rattling usually comes from the drip tray or pipes at the back, and squealing from a fan. Our guide to fridge noises explains what each sound means.

Regassing Hisense fridges

If your Hisense runs all the time but never gets cold, and the fans, sensors and defrost system test fine, it may have a refrigerant leak. We find and repair the leak, fit a new filter drier, pressure test, vacuum and recharge by weight with the gas on the rating plate. See our fridge regassing page.

Booking a Hisense fridge repair

Send us the model number from the rating plate, any code on the display and what the fridge is doing. Every repair comes with a 6-month warranty. We repair Hisense fridges across Midrand, Randburg, Vanderbijlpark and the rest of Gauteng.

Hisense fridge error codes

Hisense uses different codes on different models, so treat this as a guide and check your manual. These are the most common meanings of the E codes on Hisense fridges with a display.

Code What it usually means
E1 Temperature sensor fault: the freezer sensor on some models, the fridge sensor on others
E2 Temperature sensor fault: the fridge sensor on some models, the freezer sensor on others
E3 Defrost sensor fault
E4 Evaporator fan or defrost circuit fault, depending on the model
E5 Condenser fan fault
E6 Communication error between the main board and the display

Codes and their meanings vary between models and display types. Check your user manual, or send us a photo of the display and the rating plate on WhatsApp.

Authorised Hisense fridge repairs

Proregas is authorised to repair Hisense fridges. Every repair and regas we do comes with a 6-month warranty. If your Hisense fridge is still under the manufacturer's warranty, tell us when you book and have your proof of purchase ready.

Hisense and the Hisense logo are trademarks of their respective owner and are used here only to identify the fridges we repair.

Areas

Hisense fridge repairs across Gauteng

We repair Hisense fridges at homes in all of these areas.

FAQ

Hisense fridge repair questions

What does E1 or E2 mean on my Hisense fridge?

On most Hisense fridges, E1 and E2 point to a temperature sensor fault. Which compartment it refers to depends on the model. The cause is usually the sensor itself or its wiring, and both can be tested and replaced.

My Hisense side-by-side is not dispensing water. Why?

On models with a water tank, check that the tank is seated properly and the lid is closed. A frozen water line in the door, a dispenser lock left on or a faulty dispenser switch can also stop the flow. We repair all of these.

Why is my Hisense fridge section warm when the freezer is cold?

On frost-free Hisense fridges, cold air is blown from the freezer side into the fridge. If ice builds up on the evaporator because of a defrost fault, or the fan fails, the fridge section warms up while the freezer keeps working.

Do you repair Hisense bar fridges and smaller models?

Yes. We repair Hisense fridges of every size, from bar fridges and single-door models to large side-by-sides and multi-door fridges.

Hisense fridge not working?

Book a Hisense fridge repair at your home. A technician can be with you in about an hour, and you get a clear price before any work starts.

WhatsApp us