Authorised Smeg fridge repairs

Smeg fridge repairs in Gauteng

A Smeg retro fridge is worth keeping. We repair and regas Smeg fridges at homes across Gauteng, from FAB 1950s-style fridges to built-in and side-by-side models.

  • 25 years' experience5,000+ fridges repaired
  • 300+ five-star reviewsFrom Gauteng customers
  • Open 24/7With you in about 1 hour
  • 6-month warrantyOn repairs and regassing

Smeg fridge repairs at your home

Smeg is an Italian family company, founded in 1948 in Guastalla, near Reggio Emilia. It is best known for its FAB fridges, with their rounded 1950s styling and bold colours, which have been a favourite in South African kitchens for years. Smeg also makes built-in fridges, side-by-sides and multi-door models.

A Smeg fridge is often a design choice as much as an appliance, so most owners would rather repair it than replace it. The good news is that the common faults are very fixable. We diagnose the problem at your home and give you a clear price before any work starts.

Common Smeg fridge faults

Ice building up

Many FAB fridges are static models. The cooling happens through the back wall of the fridge and through the ice box or freezer compartment, and ice slowly builds up over time. That is normal, and the fix is a regular manual defrost. Ice that builds up much faster than usual points to warm air getting in, usually through a door seal that is not gripping, or a door that does not quite close. Our guide to ice build-up explains what other kinds of ice mean.

Water inside the fridge

Frost on the back wall of a static Smeg melts when the compressor stops, runs down a channel and drains through a small hole to a tray above the compressor. When that hole blocks, water collects under the crisper drawer or on the bottom shelf. Clearing it gently with warm water often solves the problem. See our guide to fridges leaking water.

Door seals and hinges

Retro Smeg doors are large and heavy, and the seal is a key part of the look. Over the years hinges can drop, seals can twist or tear, and the door can stop closing cleanly. That lets warm air in, which means more ice, longer running times and higher bills. We adjust hinges and replace seals. Seals and handles in matching colours sometimes need to be ordered, and we confirm the lead time before we start.

Too warm or too cold

Most FAB fridges use a mechanical thermostat dial. If the fridge stops cooling with the light on, or freezes everything on a normal setting, the thermostat may have failed. Remember to check the dial first, because it is easily bumped. Our guide to a fridge freezing food covers the other causes.

Built-in Smeg fridges

Integrated fridges need the ventilation gaps the manufacturer specifies. Blocked plinth vents or a tight cabinet make a built-in fridge run hot and long.

Noises

A fridge that has started to rattle or buzz usually has a loose part touching the cabinet. See our guide to fridge noises.

Regassing Smeg fridges

If your Smeg runs all the time but never gets cold, and the thermostat and seals are fine, it may have a refrigerant leak. We repair the leak, fit a new filter drier, pressure test, vacuum and recharge by weight with the gas on the rating plate. See our fridge regassing page.

Booking a Smeg fridge repair

Send us the model number from the rating plate, which on FAB fridges is usually inside the fridge, and a short description of the problem. Every repair comes with a 6-month warranty. We repair Smeg fridges across Sandton, Bedfordview, Centurion and the rest of Gauteng.

Authorised Smeg fridge repairs

Proregas is authorised to repair Smeg fridges. Every repair and regas we do comes with a 6-month warranty. If your Smeg fridge is still under the manufacturer's warranty, tell us when you book and have your proof of purchase ready.

Smeg and the Smeg logo are trademarks of their respective owner and are used here only to identify the fridges we repair.

Areas

Smeg fridge repairs across Gauteng

We repair Smeg fridges at homes in all of these areas.

FAQ

Smeg fridge repair questions

Why is there water at the bottom of my Smeg retro fridge?

Usually the drain hole at the bottom of the back wall is blocked. On static Smeg fridges, frost on the back wall melts and runs into that hole, then out to a tray at the back where it evaporates. If food or ice blocks the hole, the water pools inside. Gently flushing it with warm water often clears it.

How often should I defrost my Smeg FAB fridge?

Many FAB fridges are static models with an ice box or freezer compartment that needs defrosting by hand. Defrost it when the ice is about half a centimetre thick. Switch off, let the ice melt by itself and never chip it away with a knife, because one slip can puncture the cooling pipes.

My Smeg fridge door does not close properly. Can you fix it?

Yes. Retro Smeg doors are heavy, so hinges can drop and seals can twist over time. We adjust or replace the hinges and fit a new seal if needed. Colour-matched seals and parts sometimes have to be ordered, and we tell you the lead time first.

Do you repair built-in and side-by-side Smeg fridges?

Yes. We repair Smeg fridges of every type, including integrated fridges inside kitchen cabinets, side-by-sides with water dispensers and multi-door models.

Smeg fridge not working?

Book a Smeg fridge repair at your home. A technician can be with you in about an hour, and you get a clear price before any work starts.

WhatsApp us